McAfee M4050 - Network Security Platform Podręcznik Użytkownika Strona 3
- Strona / 12
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
e
Install modules in the Sensor's Monitoring ports.
2 Cabling the Management and Console ports
Ensure the Sensor is powered OFF before attaching cables.
a
Plug a Category 5e Ethernet cable in the Mgmt port.
b
Plug the other end of the cable into the
network device connected to your
Manager server.
c
Plug the DB9 Console cable supplied in
the Sensor box into the Console port
(labeled Console on the Sensor front
panel).
d
Connect the other end of the Console
port cable directly to a COM port of the
PC or terminal server you will be using
to configure the Sensor (for example, a
PC running correctly configured Windows HyperTerminal software). You must connect directly to
the console for initial configuration; you cannot configure the Sensor remotely.
The required settings for HyperTerminal are:
• Baud rate: 38400 • Stop Bits: 1
• Number of Bits: 8 • Control Flow: None
• Parity: None
e
Plug the female end of a power cable into the power inlet and plug the other end into a power
source. The Sensor ships with standard US power and international cables.
The M-3050/M-4050 does not have a power switch; you need to only plug the power
cable into a power source.
3
Heidolph RZR 2041 manuály
Uživatelské manuály a uživatelské příručky pro Zařízení Heidolph RZR 2041.
Poskytujeme 1 manuály pdf Heidolph RZR 2041 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentarze do niniejszej Instrukcji